No sanding needed between coats and no unpleasant smell. Seal with a topcoat, allowing extra dry time. Do not recoat until you are sure the stain is dry. However, one of the most attractive attributes of this product is the illusion of texture. I love love love them!!! Watch a good video demonstrating a dry brush technique here. Let stain dry overnight. The table was finished with one coat of General Finishes Nutmeg Gel stain, allowed to dry, then a coat of General Finishes Java Gel Stain, and finished with two coats of Gel Satin Topcoat." Apply additional coats if darker color is desired.
You can apply additional coats of the gel stain to achieve a darker, richer look that will look layered instead of solid (as achieved with the “painted on” technique). To improve adherence of the stain, mix 2 parts Gel Stain with one part Gel Satin Topcoat.
Apply as many coats of the mix as needed to obtain the desired color, allowing 24-hour dry time between coats. And I felt a little safer about the drying time just in case the kiddos accidentally touched the banisters (and they happen to still be a little damp). 1 coat Java Gel Stain applied over 1 coat Yellow Dye Stain, sealed with High Performance Topcoat satin. Hopefully you can narrow down your options now for what gel stain topcoat to use on your general finishes gel stain projects! Changing sheen after a coat or two 7. To improve adherence of the stain, mix 2 parts Gel Stain with one part Gel Satin Topcoat. So there you have it! Once several coats of Java gel have been applied, the wood will have a more solid appearance. When layering water-based and oil-based products, increase the dry time: Water over oil: Let oil-based products dry 72+hrs; Oil over water: Let water-based products dry 24+hrs If you want a darker color, apply another coat of stain in only 6 hours. Java Gel Restyle on a dining room table.
"I made this table at the request of a customer to fit between two swivel chairs in a small space. General Finishes Gel Stain on knotty pine. 2.
To fix, sand the table lightly with 120-grit sandpaper and restain the table.
Dry-Time to Touch: 4-6 hours; Dry-Time to Recoat with Stain When "Wiping Off": 72 hours. Check out the before and after pictures and learn how to refinish kitchen cabinets or any cabinetry or furniture your heart desires with this general finishes gel stain tutorial!
Ok- here is what I have, and what I've done.. 1- On a bathroom vanity that was standard oak. Once you're satisfied with the color, apply General Finishes's satin gel topcoat finish. 5. Fixing a scratch or problem spot (paint vs. stain) 6. Here are General Finishes recommended dry times for applying multiple coats of Gel Stain and Gel Topcoat over an existing finish. General Finishes Gel Stain on knotty pine. General finishes gel stain tutorial using antique walnut gel stain to refinish kitchen cabinets and bathroom vanities in our first flip! 2 coats of Java Gel and 3 Coats of General Finishes High Performance Top Coat in Flat. I used GF Georgia Cherry 4 coats 24+ hours dry time between each coat. This way the banister would have almost 4-6 hours to dry before they came back home.
- John of John Harryman Designs Appling with sponge/foam brush- waiting just a few minutes then wiping.. then 3 ( 4-6 hour between coats)of GF high performance top coat.. Dry Time to Touch: 12 hours; Dry Time to Re-coat: 24 hours . In this example, we used two coats of stain and allowed a bit of the original cherry finish to come through. Special formula repels dust between coats. How to apply to avoid brush strokes (paint & topcoat). Correcting a spot - water or heat damage 4. Oh and here’s a neat little infographic for applying gel stain top coat! General Finishes recommends 6-8 hours of dry time between coats. If in doubt, wait longer. Humidity or cold temperatures will increase dry times. In GF's finish line, you can use General Finishes Arm-R-Seal (this topcoat ambers) over dark colors and General Finishes High Performance over light colors. Correcting a blotchy application (stain). Hazing/Clouding Finish (usually dry time relating to topcoat/gel stain) 3. Stains dry to the touch in minutes.